Header Ads

Smart Liquidity Hunter for MT4 and MT5: How Liquidity Sweeps Work

A recent high breaks, and for a moment the market looks ready to run. Then the candle closes back below that same high. Anyone who chased the breakout is left wondering what happened. The opposite can occur at a low: price slips below an obvious level, only to climb back above it before the candle finishes.

These moves are easy to notice in hindsight and much harder to assess while watching a live chart. Smart Liquidity Hunter is a free indicator for MetaTrader 4 and MetaTrader 5 that helps traders spot a specific version of this pattern, often called a liquidity sweep. It gives you a consistent set of conditions to review instead of relying on a quick visual guess.

Professional trading desk showing a trader reviewing forex charts with Smart Liquidity Hunter
Concept mockup of a trader's workspace. The charts are illustrative, not actual platform screenshots or trading results.

This review draws on the Smart Liquidity Hunter documentation and the MT4/MT5 version 1.11 source code, reviewed on . The goal here is practical: what the indicator looks for, how to interpret its arrows and settings, and where its limitations begin.

What does Smart Liquidity Hunter actually detect?

Start with two simple chart terms. A swing high is a local peak, where price has risen and then turned lower. A swing low is a local trough, where price has fallen and then turned higher. Traders often watch these areas because they offer reference points for the next move.

Now imagine price dropping below a previous swing low during a one-hour candle. Before that hour ends, it climbs back above the level. That is the kind of attempted breakdown and rejection the indicator is designed to examine. A similar move above a swing high can produce a bearish setup.

New to candlestick charts? Each candle summarizes trading over a set period. Its thin upper and lower lines, known as wicks, show the furthest prices reached. The larger body shows the opening and closing prices. A long wick can tell you that price visited an area but did not finish there.

The word liquidity deserves some care. Smart Liquidity Hunter calculates its patterns from candle prices; it does not see the order book or identify where other traders' stop-loss orders are sitting. Its sweep levels are a price-action interpretation, not proof that institutions have entered the market.

How does a sweep become a signal?

The process starts by identifying a confirmed swing. With the default SwingStrength of 3, the potential turning point needs three candles on either side of it. The three candles after the turning point must have finished before the level can be treated as confirmed. This creates a deliberate delay: the indicator is not claiming to know a swing high or low the instant it forms.

Next, the indicator selects a recent valid swing within its age limit. With RequireFreshLevel enabled, levels that an earlier candle already broke are filtered out. A simple touch does not automatically disqualify a level.

A candidate candle must then move far enough beyond that level. The minimum distance is whichever is greater: a fixed number of points or a threshold based on recent price volatility. After the move, the candle must close back on the original side of the swing. The indicator also checks the length of the rejection wick and where the close sits within the candle's overall range.

A sweep below a swing low can qualify as bullish; a sweep above a swing high can qualify as bearish. If a candle happens to meet both directions, the indicator skips it. Signals are based on completed candles, not a candle that is still changing.

How to read the arrows and chart levels

A green arrow below a candle identifies a bullish sweep that passed the filters. A red arrow above a candle identifies a bearish sweep. Dashed lines help show the swing levels being considered. A small on-chart dashboard gives context such as the symbol, timeframe, level and most recent signal found in the scanned history.

That makes a chart easier to review, especially after a busy trading session. But an arrow is a pattern marker, not an instruction to place an order. Look at the wider trend, the next nearby price area, current spreads and whether a trade could be managed with sensible risk. A strong trend can keep moving even after a convincing-looking sweep.

One detail beginners often miss: the space between an arrow and its candle is a visual setting, not a suggested entry price or stop loss. The dashboard's “last signal” refers to the latest qualifying event within the history it checks; it may not refer to an older arrow you are currently studying.

Natural mockup of a professional trader reviewing forex price action and a trading journal
Reviewing chart setups alongside written notes can help separate an interesting signal from a well-planned trade.

A simple EURUSD example: price breaks a low and comes back

Here is a hypothetical example using a five-decimal EURUSD quote. Suppose a confirmed swing low sits at 1.08500. On this quote format, the default 12 points equal 0.00012, or 1.2 pips.

Assume the average true range of earlier candles is 0.00080. Multiplied by the default volatility ratio of 0.10, that becomes 0.00008. The fixed 0.00012 threshold is larger, so it wins. To qualify, the new candle's low must be below 1.08488; merely touching that price does not meet the strict threshold.

Now picture a candle that opens at 1.08515, reaches 1.08540, falls to 1.08480 and finally closes at 1.08530. It moved sufficiently below the swing low and closed back above it. The lower wick represents about 58% of the candle's full range, while the close sits roughly 83% of the way up from the low.

Assuming the swing is still eligible and the other filters pass, this meets the default bullish conditions. It does not mean the next EURUSD candle must rise. This is an illustration of the detection rules, not an entry recommendation. On gold or another instrument, check your broker's point size instead of reusing EURUSD pip values.

Which Smart Liquidity Hunter settings matter?

You do not need to adjust everything at once. Start with the defaults, study a few examples and only then change one parameter at a time. Otherwise, it becomes difficult to tell why the chart suddenly shows more or fewer arrows.

Setting Default What it controls
SwingStrength3How many completed candles are needed on each side to confirm a swing.
MaxSwingAge100 barsHow old a swing level may be when a candidate signal appears.
MaxBarsToScan1,000 barsThe amount of closed-candle history the indicator processes and displays.
MinSweepPoints12 pointsThe fixed minimum distance for a break beyond the swing.
VolatilityPeriod / MinSweepVolRatio14 / 0.10The earlier-candle true-range average and its volatility multiplier.
MinWickPercent25%The minimum rejection wick as a share of the full candle range.
MinCloseLocationPct60%A bullish close must be in the upper 40% of the range; bearish in the lower 40%.
RequireFreshLevelOnExcludes levels previously broken before the candidate signal.

There are two useful technical details here. The volatility measure is a simple average of prior true ranges, not Wilder-smoothed ATR, and the candidate signal candle is excluded from that average. Also, the candle's body color does not have to match the arrow direction by default. That extra condition applies only if you turn on RequireCandleColor.

How to install Smart Liquidity Hunter on MT4 or MT5

Choose the file for your actual MetaTrader platform. Despite the MQL5 website's name, it hosts both MT4 and MT5 code. The indicator has separate download pages:

  1. In MetaTrader on your computer, choose File → Open Data Folder.
  2. Copy the source file into MQL4/Indicators for MT4 or MQL5/Indicators for MT5.
  3. Open the file in the matching MetaEditor and select Compile (or press F7). Check that compilation finishes without errors.
  4. Refresh the Navigator panel or restart MetaTrader, then drag the indicator onto a chart from the Indicators list.
  5. Keep the default inputs initially and allow enough price history to load.

The source code is available at no charge and does not require an external include file or a DLL import. If you have multiple MetaTrader installations, double-check that you copied it into the data folder of the terminal you actually use.

A practical routine for using the indicator

Start with one market and one timeframe in a demo account. When an arrow appears, write down the swing level, the broader market direction, nearby support or resistance, and why you would or would not consider the setup. Keep examples that fail as well as the ones that look impressive. A journal built this way teaches more than a collection of winning screenshots.

If you do not want to watch every candle, the indicator also offers popup, sound and push alerts. All three are off by default. Push alerts require notifications to be configured in MetaTrader. During normal updates, alerts apply when a new candle has closed; the indicator does not replay a sound or push message for every historical arrow when it is first attached.

Keep the pattern check separate from the trade decision. You still need your own invalidation level, position size and maximum acceptable loss. Smart Liquidity Hunter does not calculate your lot size, place a stop loss, set a take profit or execute trades for you.

What it can—and cannot—promise

Using completed candles avoids provisional arrows on a still-forming candle. That is useful, but it is not a guarantee that every historical chart display will remain identical forever. Different input values, corrected broker data and a changing scan window can alter what appears. Older signals may also disappear from the displayed range as new bars arrive.

The confirmation delay is part of the design. A level has to earn its status as a swing before being used, so it cannot be known at the exact moment of the top or bottom. Different brokers' price feeds may produce slightly different signals, even on the same symbol and timeframe.

The biggest limitation is the simplest: a sweep is not proof of a reversal. A green arrow does not guarantee a rally, and a red one does not guarantee a sell-off. This is a feature review, not a performance test; no win rate or profitability claim is being made.

Common questions

Why are there no arrows on my chart?

It may be working normally. No closed candle in the scanned history may satisfy every condition. Check that the code compiled correctly, enough price data has loaded, and you are using the intended platform. Simply crossing a swing level is not enough to trigger a marker.

Why did I get no alert when I first added the indicator?

Alerts are disabled by default. Even after enabling them, previously detected signals are not all announced when you attach the indicator, reload history or catch up on several missing candles. The notifications are designed for qualifying new signals during normal operation.

Bottom line: if you are learning to recognize failed breaks around swing levels, Smart Liquidity Hunter can be a useful chart-reading companion. Download the version that matches your terminal, take a look at the examples and full settings in the official Smart Liquidity Hunter guide, and spend time observing it on a demo chart before making it part of any trading plan.

No comments

Powered by Blogger.